Open now · 24 hours, 7 days a weekNICEIC approved · Part P registeredNo call-out fee020 3051 8891
Booked appointments

Electrical fault finding and repairs in Clapham

Tripping breakers, dead circuits and intermittent faults traced properly instead of guessed at.

NICEIC registered No call-out fee Fixed price before we start From £85

From £85

first hour including full diagnosis, then £65/hour.

Typical time on siteMost faults located within the first hour
Call-out feeNone
Evening / weekend premiumNone
Standard hourly rate£65
Guide prices, excluding VAT. We confirm a fixed price before starting — you will never get a bill you did not agree to. Full price list →
Call 020 3051 8891
Short answer

Most tripping-breaker faults are found within the first hour, and that first hour costs £85. We trace faults with insulation resistance and loop testing rather than swapping parts until it stops — which is how people end up paying for a new consumer unit they never needed.

You need us if

  • An RCD or breaker that trips repeatedly, or only at certain times
  • A dead socket, circuit or lighting ring
  • Lights that flicker or dim when an appliance starts
  • A circuit that only trips when it rains, or overnight
  • Warm switches, sockets or a warm consumer unit
  • Another electrician has already 'fixed' it and it came back

What's included

  • Systematic testing — insulation resistance, continuity, earth loop impedance
  • Intermittent and weather-related faults chased properly, not guessed
  • The cause explained and shown to you, not just described
  • Most repairs completed on the same visit from van stock
  • A fixed price for the repair before we do it
  • Minor Works Certificate covering everything altered

The standard we work to

Diagnosed and repaired to BS 7671 (18th Edition), with test results recorded on a Minor Works Certificate.

Book fault finding

Tell us about the property and we'll come back with a fixed price.

In a hurry? Call 020 3051 8891 — answered 24/7.

Questions

Fault finding — what people ask

Why does my RCD keep tripping?
An RCD trips when it detects current leaking to earth — usually from moisture in an outdoor circuit or a bathroom extractor, a failing appliance element (fridge, washing machine, immersion heater), or damaged cable insulation. Nuisance tripping that happens overnight or in wet weather almost always points to an external or bathroom circuit. Testing finds it in about an hour; guessing can take weeks.
How do you find an intermittent fault?
By measuring rather than replacing. Insulation resistance testing finds cable breakdown even when the fault is not currently showing, and splitting the circuit narrows it down by halves. For genuinely intermittent faults we sometimes fit a temporary logging device for a few days. It is slower than swapping parts, but it is the only method that reliably ends with the fault actually gone.
How much does electrical fault finding cost?
£85 for the first hour, which includes full diagnosis, then £65 per hour after. The large majority of faults are found inside that first hour. We give you a fixed price for the repair itself before doing it, so the diagnostic cost and the repair cost are never blurred into one open-ended bill.
Half my sockets have stopped working — is that serious?
It usually means one circuit has tripped or a connection has failed, most often at a socket where a screw terminal has worked loose and started to arc. That is a genuine fire risk and worth dealing with promptly, though it is not normally a middle-of-the-night emergency. If there is any burning smell or discolouration around a socket, switch that circuit off at the board and treat it as urgent.

Need fault finding in Clapham?

We answer the phone 24 hours, 7 days a week and aim to be with you in 60–90 minutes. No call-out fee, and one rate day or night.

Call 020 3051 8891Book a visit